Stainless Steel Electric Gate Valve
- Simple structure, easy to manufacture and maintain
- Small working stroke and short opening and closing time
- Good sealing performance, small friction between sealing surfaces, and long life
- In the process of opening and closing, the friction of the sealing surface is smaller than that of the gate valve, which is wear-resistant
- usually only one sealing surface, good manufacturing process, easy to maintain
- Electric actuator is easy to operate design & Manufacture: KS B2361Construction Length: KS B2361
- Flange Dimension: KS B2361
- Pressure Test: KS B2361
- After the test, remove stagnant water, suburban viscera, anti-rust treatment
| Technical Parameters of Valve Actuator |
| Power supply | conventional: single phase 220v, three phase 380v |
| special: three phase 400v, 415v, 660v(50Hz, 60Hz) | |
| Working environment | Ambient temperature: -20 ~ + 60 ℃ (special temperature environment can be customized) |
| Relative humidity: 95% (at 25 ° C) | |
| Protection level | Outdoor type and explosion-proof type are IP55 (IP65, IP67, IP68 can be provided for special order) |
| Working system | short time 10 minutes (15-60 minutes for special order) |
| Technical Parameters of Valve Body |
| Valve Body | Valve components | ||
| Nominal size | DN50-DN400 | Sealing material | PTFE, EPDM |
| Body Material | Stainless Steel | Disc Material | Stainless Steel |
| End Connection | Flange Ends & Butt welding Ends | Stem Material | Carbon iron |
| Operating Pressure | ASME CL, 150, 300, 600, 900, 1500, 2500 | Applicable media | Water, Air, Gas, Petroleum, Oil, Liquid |
