HK60-Q-P Series UPVC Electric Actuated Ball Valve with the true union(double union) quick connection. Easy to install and easy to repair. This item is your cost-effective choice for your automation needs. Low cost & food safe. Applied in water treatment, paper & pulp, wastewater treatment, etc. Available in 2-way and 3-way ball valve types for your applications.
Also available in manual control, signal control, Bluetooth control, or wireless control to help you control the valve easier.
| Model | HK60-Q-P 2 Way UPVC Ball Valve HK60-Q-P 3-Way UPVC Ball Valve |
| Connection | Double union |
| Size Range | 1/2in to 4in (1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2.5″, 3″, 4″) |
| Pressure | 10bar |
| Temperature | -10℃ to 80℃ (14℉ to 176℉) |
| Medium | Water, Wastewater, Seawater, Air and other medium |
| Voltage | DC-12V, 24V; AC-24V, 110V, 220V, 380V |
| Input/Output Signal | 4-20mA, 1-5VDC, 0-10VDC |
| Actuator Options | ON/OFF type, Modulating type, Intelligent type |
Introduction
Ultra Low Torque, Elegant, Durable, Corrosion Resistance Full Flow, PTFE Ball sealing, Low Torque Can Use the Handle Regulating Valve Seat Tightness Released By The Central Section Is Still Intact, Valves, Replaceable To Provide Supplementary Platform Embedded Copper Nut Products Convenient Automatic Actuator.
Installation Instruction
1. Verify that the valve breakaway torque is less than the rated output torque of the actuator.
2. Any mechanical stops that would interfere with the operation of the actuator must be removed before installation of the actuator. i.e. lever. travel stops. etc.
3. The actuator output coupling must be centered with the valve stem to prevent side loading, which causes premature stem packing wear.
4. To use the manual override feature (identified on the cover label), the override shaft must be pressed down firmly at least 1/4″ in order to disengage the motor from the gears. The manual override is not designed to overcome torque in excess of the rated torque of the actuator. Serious damage to the gear system may result from the excessive turning force on the manual override.
5. This Series actuator may be mounted in any position. i.e. horizontal. upside down. If the conduit entrance points upward, conduit piping must be oriented to prevent condensation from entering the actuator from the conduit pipe. 
